COBI Bell Boeing V-22 Osprey Tiltrotar Aircraft: Set #5836
*FREE SHIPPING AT $50 in the USA
Specifications:
Catalog no:COBI-5836
Pieces: 1090
Age: 7+
SCALE: 1:48
Figures: 2
PAD PRINTED
Dimensions (inches): 15.4” long, 19.7” wide, 5.9” high
The Bell-Boeing V-22 Osprey is a fascinating and futuristic combination of a helicopter and an airplane. The tiltrotor/rotator was the first short take-off and landing multi-role aircraft. It owes its extraordinary properties to the rotating drive system. Engine nacelles with rotors with a diameter of 12 meters can rotate during flight. Thanks to this solution, the machine can take off and land like a helicopter, and after changing the position of the engines, it goes to horizontal flight. Turning the propulsion nacelles by 45 degrees enables both short take-off and landing, similar to STOL aircraft. The Osprey was jointly developed by Bell Helicopter Textron, which produces wings, engine nacelles with Rolls-Royce engines, rotors, propulsion system, tail control surfaces and loading ramp, and the Boeing Company, which produces the fuselage, cockpit, avionics and controls. The Osprey manufacturing company is called Bell-Boeing. Due to its extraordinary properties, the V-22 Osprey found its way into the equipment of the United States Marine Corps, United States Navy and other services, with the only exception being the US Army. It is used in missions around the world. The Osprey has marked its presence in the Middle East and Afghanistan. The first foreign user of the V-22 was Japan.
The COBI model of the Bell-Boeing V-22 Osprey was released under the license of the American manufacturer of combat helicopters, Bell Helicopter Textron. Developed in 1:48 scale to match the rest of the Armed Forces collection, the model consists of 1090 elements and includes two figures depicting pilots in distinctive uniforms. The length of the model is 390 mm, the width is 500 mm! Completely new elements have been developed for the set, which make our model even better! Numerous detailed prints capture the look of the signature test paint. The most important functionalities of the model are the drive nacelles, which can be set in different positions, rotating rotor blades, opening cabin doors with stairs, access to the cockpit and the possibility of placing figures there, and an opening rear loading hatch. This amazing tiltrotor/rotator is the perfect set for collectors and fans of military, aviation and history.
• 1090 high-quality elements
• Produced in the EU by a company with over 20 years of tradition
• The blocks meet the safety standards of products for children
• Fully compatible with other brands of construction blocks
• Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature
• Clear and intuitive instructions based on illustrations and step-by-step directions
• 100% prints, no stickers
• Plate with the name of the set
• Two figures of pilots
Model dimensions (L x W x H): 390 mm (15.4") x 500 mm (19.7") 150 mm (5.9")
*FREE SHIPPING AT $50 in the USA
Specifications:
Catalog no:COBI-5836
Pieces: 1090
Age: 7+
SCALE: 1:48
Figures: 2
PAD PRINTED
Dimensions (inches): 15.4” long, 19.7” wide, 5.9” high
The Bell-Boeing V-22 Osprey is a fascinating and futuristic combination of a helicopter and an airplane. The tiltrotor/rotator was the first short take-off and landing multi-role aircraft. It owes its extraordinary properties to the rotating drive system. Engine nacelles with rotors with a diameter of 12 meters can rotate during flight. Thanks to this solution, the machine can take off and land like a helicopter, and after changing the position of the engines, it goes to horizontal flight. Turning the propulsion nacelles by 45 degrees enables both short take-off and landing, similar to STOL aircraft. The Osprey was jointly developed by Bell Helicopter Textron, which produces wings, engine nacelles with Rolls-Royce engines, rotors, propulsion system, tail control surfaces and loading ramp, and the Boeing Company, which produces the fuselage, cockpit, avionics and controls. The Osprey manufacturing company is called Bell-Boeing. Due to its extraordinary properties, the V-22 Osprey found its way into the equipment of the United States Marine Corps, United States Navy and other services, with the only exception being the US Army. It is used in missions around the world. The Osprey has marked its presence in the Middle East and Afghanistan. The first foreign user of the V-22 was Japan.
The COBI model of the Bell-Boeing V-22 Osprey was released under the license of the American manufacturer of combat helicopters, Bell Helicopter Textron. Developed in 1:48 scale to match the rest of the Armed Forces collection, the model consists of 1090 elements and includes two figures depicting pilots in distinctive uniforms. The length of the model is 390 mm, the width is 500 mm! Completely new elements have been developed for the set, which make our model even better! Numerous detailed prints capture the look of the signature test paint. The most important functionalities of the model are the drive nacelles, which can be set in different positions, rotating rotor blades, opening cabin doors with stairs, access to the cockpit and the possibility of placing figures there, and an opening rear loading hatch. This amazing tiltrotor/rotator is the perfect set for collectors and fans of military, aviation and history.
• 1090 high-quality elements
• Produced in the EU by a company with over 20 years of tradition
• The blocks meet the safety standards of products for children
• Fully compatible with other brands of construction blocks
• Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature
• Clear and intuitive instructions based on illustrations and step-by-step directions
• 100% prints, no stickers
• Plate with the name of the set
• Two figures of pilots
Model dimensions (L x W x H): 390 mm (15.4") x 500 mm (19.7") 150 mm (5.9")
*FREE SHIPPING AT $50 in the USA
Specifications:
Catalog no:COBI-5836
Pieces: 1090
Age: 7+
SCALE: 1:48
Figures: 2
PAD PRINTED
Dimensions (inches): 15.4” long, 19.7” wide, 5.9” high
The Bell-Boeing V-22 Osprey is a fascinating and futuristic combination of a helicopter and an airplane. The tiltrotor/rotator was the first short take-off and landing multi-role aircraft. It owes its extraordinary properties to the rotating drive system. Engine nacelles with rotors with a diameter of 12 meters can rotate during flight. Thanks to this solution, the machine can take off and land like a helicopter, and after changing the position of the engines, it goes to horizontal flight. Turning the propulsion nacelles by 45 degrees enables both short take-off and landing, similar to STOL aircraft. The Osprey was jointly developed by Bell Helicopter Textron, which produces wings, engine nacelles with Rolls-Royce engines, rotors, propulsion system, tail control surfaces and loading ramp, and the Boeing Company, which produces the fuselage, cockpit, avionics and controls. The Osprey manufacturing company is called Bell-Boeing. Due to its extraordinary properties, the V-22 Osprey found its way into the equipment of the United States Marine Corps, United States Navy and other services, with the only exception being the US Army. It is used in missions around the world. The Osprey has marked its presence in the Middle East and Afghanistan. The first foreign user of the V-22 was Japan.
The COBI model of the Bell-Boeing V-22 Osprey was released under the license of the American manufacturer of combat helicopters, Bell Helicopter Textron. Developed in 1:48 scale to match the rest of the Armed Forces collection, the model consists of 1090 elements and includes two figures depicting pilots in distinctive uniforms. The length of the model is 390 mm, the width is 500 mm! Completely new elements have been developed for the set, which make our model even better! Numerous detailed prints capture the look of the signature test paint. The most important functionalities of the model are the drive nacelles, which can be set in different positions, rotating rotor blades, opening cabin doors with stairs, access to the cockpit and the possibility of placing figures there, and an opening rear loading hatch. This amazing tiltrotor/rotator is the perfect set for collectors and fans of military, aviation and history.
• 1090 high-quality elements
• Produced in the EU by a company with over 20 years of tradition
• The blocks meet the safety standards of products for children
• Fully compatible with other brands of construction blocks
• Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature
• Clear and intuitive instructions based on illustrations and step-by-step directions
• 100% prints, no stickers
• Plate with the name of the set
• Two figures of pilots
Model dimensions (L x W x H): 390 mm (15.4") x 500 mm (19.7") 150 mm (5.9")